Fits all Stratos Models - Simple Field Installation Possible

External Min/0 - 10 Vdc/DP

0 - 10 Volt DC External Input

- Sets either pump speed or head set point (over rides eletronic control)

- Input resistance greater than 100k Ohm, Dielectric strength 24 V, Accuracy +/-5%

External Minimum - potential free open terminals (jumper included)

- Close circuit normal operation - open contact pump runs at min speed

- Max contact load 24 Vdc/10mA, Dielectric strength 250 Vac

DP double pump terminals - hook up second (slave) pump

External OFF/0 - 10 VDC/DP

0 - 10 Volt DC External Input

- Sets either pump speed or head set point (over rides eletronic control)

- Input resistance greater than 100k Ohm, Dielectric strength 24 V, Accuracy +/-5%

External Off - potential free normally open input terminals (jmper included)

- Closed circuit normal operation - open contact stops power to motor, drive stay active

- Pump exercises every 24 hours - no need for additional relays

- Max contact load 24 VDC/10mA, Dielectric strength 250 Vac

DP double pump terminals - hook up second (slave) pump

LON/DP

- LON interface for LonWorks BMS building automations - FTT 10 A - LONTALK

- DP double pump termials - hook up second (slave) pump