Drainage and sewage

Share with others

How to reach us

WILO Canada Inc.

Bay 8, 925 30th St. NE
Calgary AB, T2A 5L7

Contact us

+1 403 276-9456

Mon-Fri: 8am - 5pm

Wastewater collection and transport

With regard to environmental protection and conservation of resources, wastewater collection and transport play an important role. Continuous challenges, such as the increasing solid content in sewage, which hinders operating conditions for systems, require new and innovative solutions to constantly improve the processes and the corresponding products.

Transport water into your own home

Pumping ground water with Wilo.

Become independent from expensive potable water and rainwater solution. Wilo submersible pumps will help you pump ground water as well as store it to supply your home with water.

ECC-Sump Pump

Design

  • Cast Iron Housing
  • Thermoplastic Vortex Impeller
  • Stainless Steel bottom screened inlet
  • Replaceable tether float switch
  • Permanent split capacitor motor with thermal overload protection

Application

  • Sump and Dewatering
  • Sewage
  • Drainage

Special features / product benefits

Technical data

  • 1.5 inch NPT discharge (1.24 inch adapter included)
  • 10 foot power cored included
ECS-Sump Pump

Design

  • Stainless Steel Motor housing
  • Cast Iron Volute
  • Thermoplastic Vortex Impeller
  • Vertical mechanical switch included
  • Oil-filled motor for maximum heat dissipation

Application

  • Sump and Dewatering
  • Sewage
  • Drainage

Special features / product benefits

Technical data

  • 1.5" NPT or 1.25" NPT discharge capable of handling up to .5" solids
  • 10' power cord included
ETT-Sump Pump

Design

Thermoplastic Volute

Thermoplastic Vortex Impeller

Permanent split capacitor motor with thermal overload protection

Internal water level sensor automatically turns pump on/off

Removes water with in .25 inches of surface

Application

Sump and Dewatering

Sewage

Drainage

Special features / product benefits

Technical data

15' power cord included

WCC-Sump Pump

Design

  • Cast Iron housing
  • Thermoplastic Vortex Impeller
  • Replaceable float switch for automatic operation
  • Oil-filled motor for maximum heat dissipation

Application

  • Sump and De-watering
  • Sewage and Effluent
  • Drainage

Special features / product benefits

Technical data

  • 2" NPT discharge capable of handling up to 2" solid (WCC17) or .75" solids (WCC28)
  • 10' power cord included

Feed any Processing System efficiently

Waste Water Collection

Find a efficient and easy to install solution to feed your processing systems. WILO pumps are used to pump raw water to systems such as air conditioning and cooling towers.  Call Wilo Canada today to get fast and reliable answers.

Contractor's Pump-KS Series

Design

  • Permanent of Temporary Installation
  • 2 Mechanical shafts each sealed with highly resistant silicon carbide
  • Single to 3 phase available
  • KS12- Equipped with Vortex Impleer
  • KS20-Equipped with single channel impeller
  • Equipped with Oil-filled motor for permanent operation with out the need to be fully submersed.

Application

Used to pump very muddy water and fluids with coarse contaminants

Special features / product benefits

Technical data

ECC-Sump Pump

Design

  • Cast Iron Housing
  • Thermoplastic Vortex Impeller
  • Stainless Steel bottom screened inlet
  • Replaceable tether float switch
  • Permanent split capacitor motor with thermal overload protection

Application

  • Sump and Dewatering
  • Sewage
  • Drainage

Special features / product benefits

Technical data

  • 1.5 inch NPT discharge (1.24 inch adapter included)
  • 10 foot power cored included
ECS-Sump Pump

Design

  • Stainless Steel Motor housing
  • Cast Iron Volute
  • Thermoplastic Vortex Impeller
  • Vertical mechanical switch included
  • Oil-filled motor for maximum heat dissipation

Application

  • Sump and Dewatering
  • Sewage
  • Drainage

Special features / product benefits

Technical data

  • 1.5" NPT or 1.25" NPT discharge capable of handling up to .5" solids
  • 10' power cord included
ETT-Sump Pump

Design

Thermoplastic Volute

Thermoplastic Vortex Impeller

Permanent split capacitor motor with thermal overload protection

Internal water level sensor automatically turns pump on/off

Removes water with in .25 inches of surface

Application

Sump and Dewatering

Sewage

Drainage

Special features / product benefits

Technical data

15' power cord included

WCC-Sump Pump

Design

  • Cast Iron housing
  • Thermoplastic Vortex Impeller
  • Replaceable float switch for automatic operation
  • Oil-filled motor for maximum heat dissipation

Application

  • Sump and De-watering
  • Sewage and Effluent
  • Drainage

Special features / product benefits

Technical data

  • 2" NPT discharge capable of handling up to 2" solid (WCC17) or .75" solids (WCC28)
  • 10' power cord included

Pump up the Volume

Steel casting

Find a efficient and easy to install solution to feed your large processing systems. WILO pumps are used to pump raw water to systems such as cooling processes for manufacturing systems or machinery. 

Contractor's Pump-KS Series

Design

  • Permanent of Temporary Installation
  • 2 Mechanical shafts each sealed with highly resistant silicon carbide
  • Single to 3 phase available
  • KS12- Equipped with Vortex Impleer
  • KS20-Equipped with single channel impeller
  • Equipped with Oil-filled motor for permanent operation with out the need to be fully submersed.

Application

Used to pump very muddy water and fluids with coarse contaminants

Special features / product benefits

Technical data

WCC-Sump Pump

Design

  • Cast Iron housing
  • Thermoplastic Vortex Impeller
  • Replaceable float switch for automatic operation
  • Oil-filled motor for maximum heat dissipation

Application

  • Sump and De-watering
  • Sewage and Effluent
  • Drainage

Special features / product benefits

Technical data

  • 2" NPT discharge capable of handling up to 2" solid (WCC17) or .75" solids (WCC28)
  • 10' power cord included

Pump up the Volume

Steel casting

Find a efficient and easy to install solution to feed your large processing systems. WILO pumps are used to pump raw water to systems such as cooling processes for manufacturing systems or machinery. 

Contractor's Pump-KS Series

Design

  • Permanent of Temporary Installation
  • 2 Mechanical shafts each sealed with highly resistant silicon carbide
  • Single to 3 phase available
  • KS12- Equipped with Vortex Impleer
  • KS20-Equipped with single channel impeller
  • Equipped with Oil-filled motor for permanent operation with out the need to be fully submersed.

Application

Used to pump very muddy water and fluids with coarse contaminants

Special features / product benefits

Technical data

WCC-Sump Pump

Design

  • Cast Iron housing
  • Thermoplastic Vortex Impeller
  • Replaceable float switch for automatic operation
  • Oil-filled motor for maximum heat dissipation

Application

  • Sump and De-watering
  • Sewage and Effluent
  • Drainage

Special features / product benefits

Technical data

  • 2" NPT discharge capable of handling up to 2" solid (WCC17) or .75" solids (WCC28)
  • 10' power cord included
Share with others

How can we help you?

Please contact us with any questions

We are available by phone from 8 am to 5 pm Monday through Friday

T +1 403 276-9456

F +1 403 277-9456

Wastewater collection and transport

Pioneering for You